— Topic

Manufacturing

Articles on software for made-to-order manufacturers: configurators, quoting, BOM and production, dealer portals, direct sales and AI.

BIM Objects and Revit Families: What Building-Product Manufacturers Need Now

Doors, windows, stairs and furniture get specified inside a BIM model months before anyone places an order. What fifteen years of survey data show about BIM adoption, what architects expect from manufacturers, and how configurable products can export BIM objects that are actually buildable.

SBFS Team · September 28, 2026 · 8 min read

Dealer Portals for Configurable Products: Ending the Re-Keying Chain

For manufacturers selling through dealers, every configured order is typed in several times before it reaches the factory. What B2B buyer research and a measured Deloitte case show about dealer portals, and what a portal for configurable products has to do.

SBFS Team · September 28, 2026 · 7 min read

Product Modeling: Turning Tribal Knowledge into Configuration Rules

Every configurator runs on product rules that usually live in a few engineers’ heads. Peer-reviewed research shows what capturing that knowledge is worth, why the projects stumble, and what an unmaintained rule base quietly costs.

SBFS Team · September 28, 2026 · 9 min read

Where AI Meets the 3D Configurator: The Next Interface for Custom Products

The 3D configurator solved how humans specify custom products visually. AI adds two new front doors to the same rules engine: natural language and, increasingly, other software. What stays deterministic, what becomes conversational, and how to be ready.

SBFS Team · July 20, 2026 · 7 min read

AI in Manufacturing: A Practical Guide for Small and Mid-Size Manufacturers

Nearly every manufacturer says it is investing in AI; far fewer have deployed it beyond a pilot. Government and industry survey data show where AI is actually paying off in manufacturing, and why the adoption gap between large and small manufacturers is an opening rather than a verdict.

SBFS Team · July 20, 2026 · 7 min read

AI on the Shop Floor: What Actually Works in Production Operations Today

Past the demos, three production use cases carry real evidence: maintenance, quality, and scheduling. What the data supports, what is still marketing, and why high-mix custom manufacturers need a digital production backbone before any of it.

SBFS Team · July 20, 2026 · 6 min read

AI and the Quote: Automating the Front Office of Custom Manufacturing

For custom manufacturers, the quote is where deals are won and margins are set, and where skilled people spend hours interpreting emails, drawings, and spreadsheets. Here is a clear-eyed look at what AI can and cannot do in quoting, and the architecture that makes it safe.

SBFS Team · July 20, 2026 · 6 min read

B2B E-Commerce for Manufacturers: The Direct Digital Channel Is No Longer Optional

US B2B e-commerce is heading toward $3 trillion and a quarter of all B2B sales. For manufacturers of configurable products, the question has shifted from whether to sell digitally to how to do it without breaking the dealer channel that built the business.

SBFS Team · July 20, 2026 · 6 min read

Mass Customization, Thirty Years On: The Operating Model Behind Profitable Custom Products

Mass customization was promised in 1993 and mostly failed for two decades. The constraints that broke it (no customer interface, no captured product rules, rigid production) have now fallen. Here is the operating model manufacturers use to make custom products profitable.

SBFS Team · July 20, 2026 · 7 min read

One System or Seven: What a Unified Platform Looks Like for Custom-Product Manufacturers

The typical custom manufacturer runs a website builder, a configurator SaaS, a quoting tool, spreadsheets for production, and accounting software, glued together by re-typing. Here is the capability map of a unified platform, and the integration tax it eliminates.

SBFS Team · July 20, 2026 · 6 min read

How to Choose a 3D Product Configurator: A Buyer’s Guide for Manufacturers

Evaluation criteria, integration questions, and red flags for manufacturers selecting a 3D product configurator, including when an off-the-shelf tool is enough and when you need an end-to-end platform.

SBFS Team · July 17, 2026 · 7 min read

The Business Case for 3D Product Configurators: What the Data Says

B2B buyers now expect to self-serve, visualize, and price complex products online. Here is the published evidence on what 3D product configurators change for manufacturers of configurable products: conversion, quote accuracy, and sales cycles.

SBFS Team · July 17, 2026 · 7 min read

From Configurator to BOM: Closing the Gap Between Sales and Production

Most product configurators stop at the shopping cart. For manufacturers, the real value starts after the order: turning every configuration into an accurate bill of materials and a production plan, automatically.

SBFS Team · July 17, 2026 · 7 min read